Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

$9.50

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.


$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.


$1,425.00
LP600-MB Micropositioner with magnetic base (shown with optional tilt and swivel mounting arm and 74CJ low current probeholder). Engineered for the...
+

$250.00
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.


$23.50
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.


$130.00
Triax ial BNC (male) to coax ial BNC (female) floating ground. A “must have” low current adapter for using coax ial probes and holder...
+

$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...

$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...

$10.50
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.


$18.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.


$9.50
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.


$21.00

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.


$350.00
Connect your new 74CJ probes and holders to your instrumentation without loosing performance. The 86LPC-SSMC interface cable also acts as an adapter to...
+

$795.00
LP440L shown with optional 78LP5-MMK1/2 Mounting Adapter and 74CJ probeholder. Engineered for the general purpose probing requirements, the APT model LP-440...

$350.00
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...

$350.00
The Flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of...


Contact us for a price
300 mm IsoChuck designed for Suss Microtec Prober.  Coax design with less than 120 pF of passive capacitance. The newly announced IsoChuck...

$375.00
Low Profile form factor of 74CJ and DCP100 Series with ability to use any 20 mil disposable probe.  Excellent for applications that require the following:...

Minimum quantity for "74CJA-APT-KS Coaxial Probe Holder" is 1.


$29.50
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.


$189.00
Features Converts coaxial SSMC (female) connection to SMA (male).
+

Contact us for a price
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks, designed to provide...

$98.00
Triaxial Bulkhead Jack feed through adapter. Features Triaxial Bulkhead Connector (female to female).  
+

$1,400.00
LP580-MB Micropositioner with magnetic base (shown with optional 78CJ-LP51-I Mounting Adapter and 74CJ low current probeholder). Engineered for the...
+

$35.00
Litz Ground wire

Minimum quantity for "76LWA Litz ground wire" is 1.


$1,375.00
LP540-MB Micropositioner with magnetic base (shown with optional 78LP5-MMK1/2 Mounting Adapter). Engineered for the higher end general purpose...
+

Contact us for a price
Ultem 1000 is one of several materials available for the IsoChuck Series of wafer chucks. Contact American Probe & Technologies for details on the...

$225.00
Features Allows mounting of 74CJ series probe holder on Suss Microtec positioners. Isolated design provides quasi-triaxial connection for low current...
+

$145.00
+

$350.00
Course Tilt and Swivel Probeholder Mounting Assembly. Features Designed for use on the LP5XX - LP600 Series of micropositioners. Mounting...
+

$14.50
The 72F Series probes are constructed from a 1 mil (.001") tungsten wire crimped into a 20 mil nickel plated copper shank. Features Excellent...

Minimum quantity for "72F Tungsten Wire (1 mil) Probe" is 20.


Contact us for a price

Contact us for a price

$175.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC plug and BNC...

$450.00
The straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The probe mounting pin jack...
+

Contact us for a price

$125.00
Universal Mount for micropositioners designed for RF probes. Features This mount is designed to maintain the form-factor of the RF probe,...
+

$195.00
+

$110.00
Features Coax ial  patch cable with R/A SSMC (female) to BNC (male) connectors. Cable length: 40" (1 meter) of RG174 coaxial. *Cost varies...

$165.00
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.


$130.00
Triaxial 3 lug BNC (female) to coaxial BNC (female) bulkhead adapter.  This series of adapter can be mounted into a chassis panel or...

$130.00
Triaxial BNC (male) to coaxial BNC (female) floating guard. Features Triaxial (male) to coax ial (female) adapter. Connections: triax ial...
+

$130.00
Triaxial 3 lug BNC (female) connector to coaxial 2 lug BNC (male) adapter. The connection configuration of this adapter is "E1": Signal to signal / triax...
+

$10.50
The 72X Series probes are constructed from a 3mil (.003") tungsten wire butt welded to a 20 mil nickel-S shank diameter. Note: All prices are...

Minimum quantity for "72X Tungsten Wire (3 mil) Probe" is 20.


$175.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coaxial cable, and terminated with RT angle SSMC plug and BNC...
+


$325.00
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
+

$150.00
Triaxial BNC (male) to 2 ea triaxial BNC (female). Features Triaxial Tee Adapter 3 lug. Includes one male to two female connections.
+

$495.00 $295.00
Notice: 2/14/2023 It has come to our attention that a required National Instruments GPIB VISA Driver that was distributed at no charge is now fee...

$110.00
Features Coaxial patch cable with SSMA (male) to BNC (male) connectors. Cable type is RG188. Cable length: 60" (1.5 meter). *Cost varies...
+

$18.50
Can be used with 74CJ and DCP-15X Series probe holders to provide a ground return path when used with another coaxial probe.  Does not require the...

Minimum quantity for "70T-034 Tungsten Probe" is 5.


$35.00
Features:  The American Probe & Technologies Ground Wire Assembly is designed to provide an easly installed method of connecting a...

Contact us for a price
The 72TC Series probes are constructed from solid 20 mil tungsten carbide rod with a ground taper. This product is currently on hold, please check...

Minimum quantity for "72TC Tungsten Carbide Probe" is 50.


$145.00
Features Adapter for converting coaxial SSMC (male) to SMA (female) adapter.
+

$175.00
Coaxial SSMC (female) to SMA (female). Features Allows connection of SSMC devices to SMA instrumentation. Connectors are female SSMC to female...
+

$295.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+

Contact us for a price
For custom shank sizes. The series is for all probes that are non-standard in shank diameter (other than 10 or 20 mil). Many shank sizes ranging from 5...

Contact us for a price
ISO-CHUCK for Electroglas 2001 with dual BNC connectors. One of the many materials that APT has chosen for the IsoChuck design is Ultem. This...

$3,800.00
See also 72T, 72TC
+

$165.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC...

Contact us for a price
DISCONTINUED - USE 72A  or 72S SERIES The 72C Series probes are constructed from a 5 mil (.005") tungsten wire with a C-bend butt welded...

$50.00
If you would like to securely provide American Probe & Technologies with your credit card information, please order this product. The credit card...

Minimum quantity for "Credit Card Portal" is 1.


Contact us for a price
Features Leakage and capacitance characterization of blank or populated probe cards. Designed for Agilent 4070 Series or Keithley S600 cards....

$2,695.00
Features Ultrasonic Cutter System includes ultrasonic generator with adjustable power output, reference meter, test button, and foot switch....
+

$8.45
71T Probes are made from solid tungsten wire and can be nickel plated for solderability. Features Common series for probe card probes. True...

Minimum quantity for "71T Tungsten Wire Probe" is 20.