$ Applied for purchase:
$ € £
$ Applied for purchase:
($)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2
Next 
Sort by Position: Low to High
64 Per Page
Custom for use with 74CJ probe holder
70 Series Custom Probes
Contact us for a price
For custom shank sizes. The series is for all probes that are non-standard in shank diameter (other than 10 or 20 mil). Many shank sizes ranging from 5...
Select options
70T-F4/125B-034x1.2 Probe
70T-034 Tungsten Probe
$18.50
Can be used with 74CJ and DCP-15X Series probe holders to provide a ground return path when used with another coaxial probe.  Does not require the...

Minimum quantity for "70T-034 Tungsten Probe" is 5.

Select options
71G Gold Plated Probe
71G Gold Plated Tungsten Probe
$17.00
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.

Select options
72A Disposable Probe
72A Tungsten Wire (5 mil) Probe
$9.50
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.

Select options
72BE Beryllium Copper (ground probe)
72BE Beryllium Copper Probe
$21.00

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.

Select options
72C Catswhisker Probe - Obsolete
72C Catswhisker Probe
Contact us for a price
DISCONTINUED - USE 72A  or 72S SERIES The 72C Series probes are constructed from a 5 mil (.005") tungsten wire with a C-bend butt welded...
Select options
72F Fine wire Probe (0.001")
72F Tungsten Wire (1 mil) Probe
$14.50
The 72F Series probes are constructed from a 1 mil (.001") tungsten wire crimped into a 20 mil nickel plated copper shank. Features Excellent...

Minimum quantity for "72F Tungsten Wire (1 mil) Probe" is 20.

Select options
72G Gold Plated Tungsten Probe
72G Gold Plated Tungsten Probe
$18.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.

Select options
72P Paliney 7 (ground probe)
72P Paliney® 7 Probe
$23.50
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.

Select options
72S Series Probe
72S Tungsten Wire (5 mil) Probe
$10.50
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.

Select options
72T Solid Tungsten Probe
72T Series Tungsten Probes
$9.50

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.

Select options
Coax Probe with R&K
73-1002-RK Probe
$165.00
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.

Select options
73APT Series Coax Probe
73APT Series Coax Probe
$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...
Select options
73APT-100K-YYY/XXXrZZZ Kelvin Probe
73APT-100K-SR Series Resistor Kelvin Probe
$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...
Select options
73CT Coax Probe (replaceable tip)
73CT-APTA Replaceable Coaxial Probe
$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.

Select options
74A-6000
74A DC Probe Holder
$75.00
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA
Select options
74B-1 DC Probe Holder
74B-1 DC Probe Holder
$95.00
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...
Select options
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74B-1K DC Probe Holder
74B-1K DC Probe Holder
$295.00
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
72J-BT In-Line probe mounting
74J-BT Triaxial Probe Holder
$475.00
The triaxial probe holder with custom bends and optional piviot mount, shown mounting into an Alessi positioner.   The in-line / low...
+ −
74J-BT-KSA2/UMK Triaxial Probe Holder
74J-BT-KSA2/UMK Triaxial Probe Holder
$575.00
The low profile, triaxial probe holder with bends to provide the OEM form-factor of the Suss Microtech probe arm.   The in-line / low...
+ −
74J-BC-6000
74J-BC Coaxial Probe Holder
$375.00
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
+ −
74J-SAI DC Probe Holder
74J-SAI DC Probe Holder
$75.00
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+ −
74JA-FPC-6000 DC Probe Holder
74JA DC Probe Holder
$125.00
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+ −
74JA-SC-6000 shown
74JA-SC Coaxial Probe Holder
$325.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
74JA-STSM Coaxial Probe Holder
74JA-ST Triaxial Probe Holder
$450.00
The straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The probe mounting pin jack...
+ −
76CPC-188-SSMA/60 Coaxial Patch Cable
76CPC-188-SSMA/60 Coaxial Patch Cable
$110.00
Features Coaxial patch cable with SSMA (male) to BNC (male) connectors. Cable type is RG188. Cable length: 60" (1.5 meter). *Cost varies...
+ −
76CPC-BNC/24 BNC patch cable
76CPC-BNC/40 Coaxial Patch Cable
$85.00
+ −
76CPC-SSMC/40 Coaxial Patch Cable
76CPC-SSMC/40 Coaxial Patch Cable
$110.00
Features Coax ial  patch cable with R/A SSMC (female) to BNC (male) connectors. Cable length: 40" (1 meter) of RG174 coaxial. *Cost varies...
Select options
76LPC-BNC/40 Coaxial Patch Cable
76LPC-BNC/40 Coaxial Patch Cable
$175.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coaxial cable, and terminated with RT angle SSMC plug and BNC...
+ −
76LPC-SSMC/40 Coaxial Patch Cable
76LPC-SSMC/40 Coaxial Patch Cable
$185.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC plug and BNC...
Select options
78CJ-LP51-I Mounting Adapter
78CJ-LP51-I Mounting Adapter
$195.00
+ −
78CJ-SMT1-I Mounting Adapter
78CJ-SMT1-I Mounting Adapter
$225.00
Features Allows mounting of 74CJ series probe holder on Suss Microtec positioners. Isolated design provides quasi-triaxial connection for low current...
+ −
78LP5-CTSM Mounting Adapter
78LP5-CTSM Mounting Adapter
$350.00
Course Tilt and Swivel Probeholder Mounting Assembly. Features Designed for use on the LP5XX - LP600 Series of micropositioners. Mounting...
+ −
78LP5-MMK1/2 Mounting Adapter
78LP5-MMK1/2 Mounting Adapter
$145.00
+ −
78RFUM-1 Mounting Adapter
78RFUM-1 Mounting Adapter
$125.00
Universal Mount for micropositioners designed for RF probes. Features This mount is designed to maintain the form-factor of the RF probe,...
+ −
79BJ20-E1-BJ79 Triaxial to Coaxial Adapter
79BJ20-E1-BJ79 Triaxial to Coaxial Adapter
$130.00
Triaxial 3 lug BNC (female) to coaxial BNC (female) bulkhead adapter.  This series of adapter can be mounted into a chassis panel or...
Select options
79BJ20-E1-PL75 Triaxial to Coaxial Adapter
79BJ20-E1-PL75 Triaxial to Coaxial Adapter
$149.00
Triaxial BNC (male) to coaxial BNC (female) floating ground. A “must have” low current adapter for using coaxial probes and holder with common SMU's. When...
+ −
79BJ73 Triaxial Adapter
79BJ73 Triaxial Adapter
$98.00
Triaxial Bulkhead Jack feed through adapter. Features Triaxial Bulkhead Connector (female to female).  
+ −
79BN73 Triaxial Tee (3 lug) Adapter
79BN73 Triaxial Tee (3 lug) Adapter
$150.00
Triaxial BNC (male) to 2 ea triaxial BNC (female). Features Triaxial Tee Adapter 3 lug. Includes one male to two female connections.
+ −
79SM2085 Coaxial Adapter
79SM2085 Coaxial Adapter
$196.00
Features Converts coaxial SSMC (female) connection to SMA (male).
+ −
79SM2090 Coaxial Adapter
79SM2090 Coaxial Adapter
$145.00
Features Adapter for converting coaxial SSMC (male) to SMA (female) adapter.
+ −
79SSMC-SMA-A1 Coaxial Adapter
79SSMC-SMA-A1 Coaxial Adapter
$175.00
Coaxial SSMC (female) to SMA (female). Features Allows connection of SSMC devices to SMA instrumentation. Connectors are female SSMC to female...
+ −
86LPC-SSMC/40-E1 Triaxial Patch Cable
86LPC-SSMC/40-E1 Triaxial Patch Cable
$350.00
Connect your new 74CJ probes and holders to your instrumentation without loosing performance. The 86LPC-SSMC interface cable also acts as an adapter to...
+ −
86LPC-TBNCL3/40 Triaxial Patch Cable
86LPC-TBNCL3/40 Triaxial Patch Cable
$325.00
Designed for microprobing industry. Shown with black cable . Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
86TPC-TBNCL3/40 Triaxial Patch Cable
86TPC-TBNCL3/40 Triaxial Patch Cable
$265.00
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
AW-7000 Ambient Wirebonding Workholder
AW7000 Series Ambient Wirebonding Workholders
$1,695.00



+ −
AW7000C Series Ambient Wirebonding Workholders
$1,695.00
+ −
AW7050 Series Ambient Wirebonding Workholders
$1,395.00
Features Ambient flat pack Wirebonding Workholder for Mech-El Bonders.
+ −
AW7050C Series Ambient Wirebonding Workholders
$1,895.00
+ −
Coaxial IsoChuck
Coaxial IsoChuck
Contact us for a price
300 mm IsoChuck designed for Suss Microtec Prober.  Coax design with less than 120 pF of passive capacitance. The newly announced IsoChuck...
Shown with optional Dynomometer
CWPT1 Wirepull Tester
$2,495.00
+ −
HC-RC1A Thermal Wafer Chuck
HC-RC1A Thermal Wafer Chuck
Contact us for a price
HC5000 Hot Chuck
HC5000 Hot Chuck
Contact us for a price
HC-6000-RC1 Series
HC6000 Thermal Wafer Chuck
Contact us for a price
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks, designed to provide...
Select options
Kelvin IsoChuck
Kelvin IsoChuck
Contact us for a price
ISO-CHUCK for Electroglas 2001 with dual BNC connectors. One of the many materials that APT has chosen for the IsoChuck design is Ultem. This...
LP440 Micropositioner
LP440 Micropositioner
$795.00
LP440L shown with optional 78LP5-MMK1/2 Mounting Adapter and 74CJ probeholder. Engineered for the general purpose probing requirements, the APT model LP-440...
Select options
LP540 Micropositioner
LP540 Micropositioner
$1,375.00
LP540-MB Micropositioner with magnetic base (shown with optional 78LP5-MMK1/2 Mounting Adapter). Engineered for the higher end general purpose...
+ −
LP580 Micropositioner
LP580 Micropositioner
$1,400.00
LP580-MB Micropositioner with magnetic base (shown with optional 78CJ-LP51-I Mounting Adapter and 74CJ low current probeholder). Engineered for the...
+ −
LP600 Micropositioner
LP600 Micropositioner
$1,425.00
LP600-MB Micropositioner with magnetic base (shown with optional tilt and swivel mounting arm and 74CJ low current probeholder). Engineered for the...
+ −
PH1 Series Wirebonding Pull Hooks
PH1 Series Wirebonding Pull Hooks
$14.50
Wirebonding Pull Hooks for small gauge Tungsten wire (12 mil)   Please refer to SPECIFICATIONS Tab for dimentional drawings
+ −

Minimum quantity for "PH1 Series Wirebonding Pull Hooks" is 10.

Triaxial IsoChuck
Triaxial IsoChuck
Contact us for a price
Ultem 1000 is one of several materials available for the IsoChuck Series of wafer chucks. Contact American Probe & Technologies for details on the...
 Prev
1 2
Next