Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

Contact us for a price
For custom shank sizes. The series is for all probes that are non-standard in shank diameter (other than 10 or 20 mil). Many shank sizes ranging from 5...

Contact us for a price
DISCONTINUED - USE 72A  or 72S SERIES The 72C Series probes are constructed from a 5 mil (.005") tungsten wire with a C-bend butt welded...

Contact us for a price
300 mm IsoChuck designed for Suss Microtec Prober.  Coax design with less than 120 pF of passive capacitance. The newly announced IsoChuck...

Contact us for a price

Contact us for a price

Contact us for a price
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks, designed to provide...

Contact us for a price
ISO-CHUCK for Electroglas 2001 with dual BNC connectors. One of the many materials that APT has chosen for the IsoChuck design is Ultem. This...

Contact us for a price
Ultem 1000 is one of several materials available for the IsoChuck Series of wafer chucks. Contact American Probe & Technologies for details on the...

Contact us for a price
Features Leakage and capacitance characterization of blank or populated probe cards. Designed for Agilent 4070 Series or Keithley S600 cards....

Contact us for a price
The WEC-04085 Direct Dock Interface is a spring-probe based interface that eliminates the primary source of parasitics on an HP 4062 Test System ....

Contact us for a price
The WEC-LC24 is a 24-channel low-leakage interface designed for low current applications requiring minimal leakage. The interface is also designed to...

Contact us for a price
The 72TC Series probes are constructed from solid 20 mil tungsten carbide rod with a ground taper. This product is currently on hold, please check...

Minimum quantity for "72TC Tungsten Carbide Probe" is 50.


Contact us for a price

$0.00
Please refer to this sheet for an explaniation of how to read American Probe & Technologies probe model numbers. Probe Speficification Chart
+

$3.25
Pogo Pin with 12MM length and 0.193" OD, Rhodium plated steel plunger probe contact. 1.5-1.7 oz spring force
+

Minimum quantity for "72SPP Series Spring Pogo Probe" is 20.


$8.45
71T Probes are made from solid tungsten wire and can be nickel plated for solderability. Features Common series for probe card probes. True...

Minimum quantity for "71T Tungsten Wire Probe" is 20.


$9.50

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.


$9.50
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.


$10.50
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.


$10.50
The 72X Series probes are constructed from a 3mil (.003") tungsten wire butt welded to a 20 mil nickel-S shank diameter. Note: All prices are...

Minimum quantity for "72X Tungsten Wire (3 mil) Probe" is 20.


$14.50
The 72F Series probes are constructed from a 1 mil (.001") tungsten wire crimped into a 20 mil nickel plated copper shank. Features Excellent...

Minimum quantity for "72F Tungsten Wire (1 mil) Probe" is 20.


$14.50
Wirebonding Pull Hooks for small gauge Tungsten wire (12 mil)   Please refer to SPECIFICATIONS Tab for dimentional drawings
+

Minimum quantity for "PH1 Series Wirebonding Pull Hooks" is 10.


$17.00
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.


$18.50
Can be used with 74CJ and DCP-15X Series probe holders to provide a ground return path when used with another coaxial probe.  Does not require the...

Minimum quantity for "70T-034 Tungsten Probe" is 5.


$18.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.


$21.00

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.


$23.50
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.


$31.25 $26.25

BNC (Female) To Double Stacking Banana Plugs (with BNC Ground Support)

+

$32.50 $28.50
FEATURES: Adapts banana jack test instruments for BNC Cable Assemblies. Banana plug spring is nickel-plated Beryllium Copper and BNC spring is...
+

$29.50
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.


$35.00
Litz Ground wire

Minimum quantity for "76LWA Litz ground wire" is 1.


$35.00
Features:  The American Probe & Technologies Ground Wire Assembly is designed to provide an easly installed method of connecting a...

$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.


$50.00
If you would like to securely provide American Probe & Technologies with your credit card information, please order this product. The credit card...

Minimum quantity for "Credit Card Portal" is 1.


$75.00
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA

$75.00
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+


$95.00
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...

$98.00
Triaxial Bulkhead Jack feed through adapter. Features Triaxial Bulkhead Connector (female to female).  
+

$110.00
Features Coaxial patch cable with SSMA (male) to BNC (male) connectors. Cable type is RG188. Cable length: 60" (1.5 meter). *Cost varies...
+

$110.00
Features Coax ial  patch cable with R/A SSMC (female) to BNC (male) connectors. Cable length: 40" (1 meter) of RG174 coaxial. *Cost varies...

$125.00
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+

$125.00
Universal Mount for micropositioners designed for RF probes. Features This mount is designed to maintain the form-factor of the RF probe,...
+

$130.00
Triaxial 3 lug BNC (female) to coaxial BNC (female) bulkhead adapter.  This series of adapter can be mounted into a chassis panel or...

$130.00
Triax ial BNC (male) to coax ial BNC (female) floating ground. A “must have” low current adapter for using coax ial probes and holder...
+

$130.00
Triaxial BNC (male) to coaxial BNC (female) floating guard. Features Triaxial (male) to coax ial (female) adapter. Connections: triax ial...
+

$130.00
Triaxial 3 lug BNC (female) connector to coaxial 2 lug BNC (male) adapter. The connection configuration of this adapter is "E1": Signal to signal / triax...
+

$145.00
+

$145.00
Features Adapter for converting coaxial SSMC (male) to SMA (female) adapter.
+

$150.00
Triaxial BNC (male) to 2 ea triaxial BNC (female). Features Triaxial Tee Adapter 3 lug. Includes one male to two female connections.
+

$165.00
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.


$165.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC...

$175.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coaxial cable, and terminated with RT angle SSMC plug and BNC...
+

$175.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC plug and BNC...

$175.00
Coaxial SSMC (female) to SMA (female). Features Allows connection of SSMC devices to SMA instrumentation. Connectors are female SSMC to female...
+

$189.00
Features Converts coaxial SSMC (female) connection to SMA (male).
+

$195.00
+

$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...

$225.00
Features Allows mounting of 74CJ series probe holder on Suss Microtec positioners. Isolated design provides quasi-triaxial connection for low current...
+

$250.00
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.

$250.00
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.


$265.00
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+

$295.00
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+

$295.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+