Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

$9.50 (£6.93)

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.


$49.50 (£36.13)

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.


$1,425.00 (£1,040.15)
LP600-MB Micropositioner with magnetic base (shown with optional tilt and swivel mounting arm and 74CJ low current probeholder). Engineered for the...
+

$250.00 (£182.48)
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.


$23.50 (£17.15)
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.


$130.00 (£94.89)
Triax ial BNC (male) to coax ial BNC (female) floating ground. A “must have” low current adapter for using coax ial probes and holder...
+

$225.00 (£164.23)
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...

$450.00 (£328.47)
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...

$10.50 (£7.66)
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.


$18.50 (£13.50)
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.


$9.50 (£6.93)
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.


$21.00 (£15.33)

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.


$350.00 (£255.47)
Connect your new 74CJ probes and holders to your instrumentation without loosing performance. The 86LPC-SSMC interface cable also acts as an adapter to...
+

$795.00 (£580.29)
LP440L shown with optional 78LP5-MMK1/2 Mounting Adapter and 74CJ probeholder. Engineered for the general purpose probing requirements, the APT model LP-440...

$350.00 (£255.47)
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...

$350.00 (£255.47)
The Flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of...


Contact us for a price
300 mm IsoChuck designed for Suss Microtec Prober.  Coax design with less than 120 pF of passive capacitance. The newly announced IsoChuck...

$375.00 (£273.72)
Low Profile form factor of 74CJ and DCP100 Series with ability to use any 20 mil disposable probe.  Excellent for applications that require the following:...

Minimum quantity for "74CJA-APT-KS Coaxial Probe Holder" is 1.


$29.50 (£21.53)
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.


$189.00 (£137.96)
Features Converts coaxial SSMC (female) connection to SMA (male).
+

Contact us for a price
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks, designed to provide...

$98.00 (£71.53)
Triaxial Bulkhead Jack feed through adapter. Features Triaxial Bulkhead Connector (female to female).  
+

$1,400.00 (£1,021.90)
LP580-MB Micropositioner with magnetic base (shown with optional 78CJ-LP51-I Mounting Adapter and 74CJ low current probeholder). Engineered for the...
+

$35.00 (£25.55)
Litz Ground wire

Minimum quantity for "76LWA Litz ground wire" is 1.


$1,375.00 (£1,003.65)
LP540-MB Micropositioner with magnetic base (shown with optional 78LP5-MMK1/2 Mounting Adapter). Engineered for the higher end general purpose...
+

Contact us for a price
Ultem 1000 is one of several materials available for the IsoChuck Series of wafer chucks. Contact American Probe & Technologies for details on the...

$225.00 (£164.23)
Features Allows mounting of 74CJ series probe holder on Suss Microtec positioners. Isolated design provides quasi-triaxial connection for low current...
+

$145.00 (£105.84)
+

$350.00 (£255.47)
Course Tilt and Swivel Probeholder Mounting Assembly. Features Designed for use on the LP5XX - LP600 Series of micropositioners. Mounting...
+

$14.50 (£10.58)
The 72F Series probes are constructed from a 1 mil (.001") tungsten wire crimped into a 20 mil nickel plated copper shank. Features Excellent...

Minimum quantity for "72F Tungsten Wire (1 mil) Probe" is 20.


Contact us for a price

Contact us for a price

$175.00 (£127.74)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC plug and BNC...

$450.00 (£328.47)
The straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The probe mounting pin jack...
+

Contact us for a price

$125.00 (£91.24)
Universal Mount for micropositioners designed for RF probes. Features This mount is designed to maintain the form-factor of the RF probe,...
+

$195.00 (£142.34)
+

$110.00 (£80.29)
Features Coax ial  patch cable with R/A SSMC (female) to BNC (male) connectors. Cable length: 40" (1 meter) of RG174 coaxial. *Cost varies...

$165.00 (£120.44)
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.


$130.00 (£94.89)
Triaxial 3 lug BNC (female) to coaxial BNC (female) bulkhead adapter.  This series of adapter can be mounted into a chassis panel or...

$130.00 (£94.89)
Triaxial BNC (male) to coaxial BNC (female) floating guard. Features Triaxial (male) to coax ial (female) adapter. Connections: triax ial...
+

$130.00 (£94.89)
Triaxial 3 lug BNC (female) connector to coaxial 2 lug BNC (male) adapter. The connection configuration of this adapter is "E1": Signal to signal / triax...
+

$10.50 (£7.66)
The 72X Series probes are constructed from a 3mil (.003") tungsten wire butt welded to a 20 mil nickel-S shank diameter. Note: All prices are...

Minimum quantity for "72X Tungsten Wire (3 mil) Probe" is 20.


$175.00 (£127.74)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coaxial cable, and terminated with RT angle SSMC plug and BNC...
+

$85.00 (£62.04)
+

$325.00 (£237.23)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
+

$150.00 (£109.49)
Triaxial BNC (male) to 2 ea triaxial BNC (female). Features Triaxial Tee Adapter 3 lug. Includes one male to two female connections.
+

$495.00 (£361.31) $295.00 (£215.33)
Notice: 2/14/2023 It has come to our attention that a required National Instruments GPIB VISA Driver that was distributed at no charge is now fee...

$110.00 (£80.29)
Features Coaxial patch cable with SSMA (male) to BNC (male) connectors. Cable type is RG188. Cable length: 60" (1.5 meter). *Cost varies...
+

$18.50 (£13.50)
Can be used with 74CJ and DCP-15X Series probe holders to provide a ground return path when used with another coaxial probe.  Does not require the...

Minimum quantity for "70T-034 Tungsten Probe" is 5.


$35.00 (£25.55)
Features:  The American Probe & Technologies Ground Wire Assembly is designed to provide an easly installed method of connecting a...

Contact us for a price
The 72TC Series probes are constructed from solid 20 mil tungsten carbide rod with a ground taper. This product is currently on hold, please check...

Minimum quantity for "72TC Tungsten Carbide Probe" is 50.


$145.00 (£105.84)
Features Adapter for converting coaxial SSMC (male) to SMA (female) adapter.
+

$175.00 (£127.74)
Coaxial SSMC (female) to SMA (female). Features Allows connection of SSMC devices to SMA instrumentation. Connectors are female SSMC to female...
+

$295.00 (£215.33)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+

Contact us for a price
For custom shank sizes. The series is for all probes that are non-standard in shank diameter (other than 10 or 20 mil). Many shank sizes ranging from 5...

Contact us for a price
ISO-CHUCK for Electroglas 2001 with dual BNC connectors. One of the many materials that APT has chosen for the IsoChuck design is Ultem. This...

$3,800.00 (£2,773.72)
See also 72T, 72TC
+

$165.00 (£120.44)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC...

Contact us for a price
DISCONTINUED - USE 72A  or 72S SERIES The 72C Series probes are constructed from a 5 mil (.005") tungsten wire with a C-bend butt welded...

$50.00 (£36.50)
If you would like to securely provide American Probe & Technologies with your credit card information, please order this product. The credit card...

Minimum quantity for "Credit Card Portal" is 1.


Contact us for a price
Features Leakage and capacitance characterization of blank or populated probe cards. Designed for Agilent 4070 Series or Keithley S600 cards....

$2,695.00 (£1,967.15)
Features Ultrasonic Cutter System includes ultrasonic generator with adjustable power output, reference meter, test button, and foot switch....
+

$8.45 (£6.17)
71T Probes are made from solid tungsten wire and can be nickel plated for solderability. Features Common series for probe card probes. True...

Minimum quantity for "71T Tungsten Wire Probe" is 20.


$75.00 (£54.74)
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA

$95.00 (£69.34)
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...

$3.25 (£2.37)
Pogo Pin with 12MM length and 0.193" OD, Rhodium plated steel plunger probe contact. 1.5-1.7 oz spring force
+

Minimum quantity for "72SPP Series Spring Pogo Probe" is 20.


$17.00 (£12.41)
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.


$1,695.00 (£1,237.23)



+

$75.00 (£54.74)
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+

$265.00 (£193.43)
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+

$295.00 (£215.33)
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+

$475.00 (£346.72)
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+

$325.00 (£237.23)
Designed for microprobing industry. Shown with black cable . Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+

$325.00 (£237.23)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.


$625.00 (£456.20)
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...

$375.00 (£273.72)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...

$250.00 (£182.48)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.

$125.00 (£91.24)
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+

$3,195.00 (£2,332.12)
Mechanical device clamping provides the optimum vibration-free positive hold down required to eliminate fixture related wire bonding problems. Mechanical...
+

$3,195.00 (£2,332.12)
Heated Workholder identical to the WH-5000; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features Variable "Z" axis...
+

$3,425.00 (£2,500.00)
Heated Wirebonding Workholder identical to the WH-5050; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features...
+

$475.00 (£346.72)
The triaxial probe holder with custom bends and optional piviot mount, shown mounting into an Alessi positioner.   The in-line / low...
+

$3,595.00 (£2,624.09)
Vacuum device hold-down Heated Wirebonding Workholder provides positive device clamping for flat based, or easily chipped substrates where mechanical...
+

Contact us for a price
The WEC-LC24 is a 24-channel low-leakage interface designed for low current applications requiring minimal leakage. The interface is also designed to...

$575.00 (£419.71)
The low profile, triaxial probe holder with bends to provide the OEM form-factor of the Suss Microtech probe arm.   The in-line / low...
+

$0.00 (£0.00)
Please refer to this sheet for an explaniation of how to read American Probe & Technologies probe model numbers. Probe Speficification Chart
+

$1,695.00 (£1,237.23)
+

$1,895.00 (£1,383.21)
+

Contact us for a price
The WEC-04085 Direct Dock Interface is a spring-probe based interface that eliminates the primary source of parasitics on an HP 4062 Test System ....

$1,395.00 (£1,018.25)
Features Ambient flat pack Wirebonding Workholder for Mech-El Bonders.
+

$1,275.00 (£930.66)
This particular wedge probe was designed for solar cell characterization.  The target resistance was 20 mill ohms, and to include one Kelvin sense...
+

$2,495.00 (£1,821.17)
Fully compatible with all workholder designs.
+

$450.00 (£328.47)
The low profile, straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The in-line /...
+

$14.50 (£10.58)
Wirebonding Pull Hooks for small gauge Tungsten wire (12 mil)   Please refer to SPECIFICATIONS Tab for dimentional drawings
+

Minimum quantity for "PH1 Series Wirebonding Pull Hooks" is 10.


$395.00 (£288.32)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
+

Minimum quantity for "74B-HV500" is 1.


$2,495.00 (£1,821.17)
+

$995.00 (£726.28)
+

$1,695.00 (£1,237.23)
The Soon to be released, 740-EPC Series of coaxial probe holder that has an embedded PC card to allow active and passive components to be integrated within...
+

$32.50 (£23.72) $28.50 (£20.80)
FEATURES: Adapts banana jack test instruments for BNC Cable Assemblies. Banana plug spring is nickel-plated Beryllium Copper and BNC spring is...
+

$31.25 (£22.81) $26.25 (£19.16)

BNC (Female) To Double Stacking Banana Plugs (with BNC Ground Support)

+