Designed for microprobing industry. Shown with yellow cable.
Features
Triaxial Cable with male triaxial BNC connectors on both ends.
Designed for micro-probing industry.
low profile design (only 156 mils OD)
* Cost varies according to cable length.
* Length: 1 meter, longer lengths available (additional charge).
| Cable Designation | TRC-50-1 |
| Impedance (Ohms) | 50±2 |
| Wire Gauge - AWG | 38 AWG |
| Nominal outer dia. | 3.962 mm (0.156 in) |
| Conductor Material: | Tinned Copper |
| Jacket Material: | Polyvinyl Chloride (PVC) |
| Jacket Color: | Yellow |
| Outer braid dia. | 0.121 |
| Dielectric outer dia. | 0.047 |
| Inner braid outer dia. | 0.069 Max |
| Inner jacket outer dia. | 0.101 |
| Conductor outer dia. | 0.015 |
| Operating temperature Range | -40°C to +75°C |
| Minimum bend radius (in.) | 0.75 |
| Max. Opr. VDC | 2.0 KV |
| Max. Opr. VAC (RMS) | 1.0 KV |
| Capacitance pf/ft. (Max) | 29.5 |
| RoHS: | Compliant RoHS Directive 2011/65/EU |
Low Noise version
86LPC-TBNCL3/40 Low Noise Triaxial Patch Cable
For longer cable lengths, consider using the larger conductor AWG below.
A larger cable version (0.245" O.D.) (lower cable resistance 28 AWG Conductor) using TRC-50-2 Cable is available upon request
