$ Applied for purchase:
$ € £
$ Applied for purchase:
($)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2 3 4 5 6 7
Next 
Sort by Popularity
16 Per Page
71G Gold Plated Probe
71G Gold Plated Tungsten Probe
$17.00
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.

Select options
AW-7000 Ambient Wirebonding Workholder
AW7000 Series Ambient Wirebonding Workholders
$1,695.00



+ −
74J-SAI DC Probe Holder
74J-SAI DC Probe Holder
$75.00
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+ −
86TPC-TBNCL3/40 Triaxial Patch Cable
86TPC-TBNCL3/40 Triaxial Patch Cable
$265.00
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
74B-1K DC Probe Holder
74B-1K DC Probe Holder
$355.00
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74J-SC Probe Holder
74J-SC - Straight Coax Probe Holder
$325.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.

86LPC-TBNCL3/40 Triaxial Patch Cable
86LPC-TBNCL3/40 Triaxial Patch Cable
$325.00
Designed for microprobing industry. Shown with black cable . Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74A series shown
74JA-BC Coax Probe Holder with custom bends
$375.00
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
74JA-FPC-6000 DC Probe Holder
74JA DC Probe Holder
$125.00
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+ −
WH5000 Series Heated Wirebonding Workholders
WH5000 Series Heated Wirebonding Workholders
$3,195.00
Mechanical device clamping provides the optimum vibration-free positive hold down required to eliminate fixture related wire bonding problems. Mechanical...
+ −
WH5000C Series Heated Wirebonding Workholders
WH5000C Series Heated Wirebonding Workholders
$3,195.00
Heated Workholder identical to the WH-5000; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features Variable "Z" axis...
+ −
WH5050C Series Heated Wirebonding Workholders
WH5050C Series Heated Wirebonding Workholders
$3,425.00
Heated Wirebonding Workholder identical to the WH-5050; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features...
+ −
WH5050 Series Heated Wirebonding Workholders
$3,595.00
Vacuum device hold-down Heated Wirebonding Workholder provides positive device clamping for flat based, or easily chipped substrates where mechanical...
+ −
 Prev
1 2 3 4 5 6 7
Next