$ Applied for purchase:
$ € £
$ Applied for purchase:
(€)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2
Next 
Sort by Popularity
64 Per Page
71G Gold Plated Probe
71G Gold Plated Tungsten Probe
$17.00 (€13.82)
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.

Select options
AW-7000 Ambient Wirebonding Workholder
AW7000 Series Ambient Wirebonding Workholders
$1,695.00 (€1,378.05)



+ −
74J-SAI DC Probe Holder
74J-SAI DC Probe Holder
$75.00 (€60.98)
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+ −
86TPC-TBNCL3/40 Triaxial Patch Cable
86TPC-TBNCL3/40 Triaxial Patch Cable
$265.00 (€215.45)
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74B-1K DC Probe Holder
74B-1K DC Probe Holder
$355.00 (€288.62)
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00 (€386.18)
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
74J-SC Probe Holder
74J-SC - Straight Coax Probe Holder
$325.00 (€264.23)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.

86LPC-TBNCL3/40 Triaxial Patch Cable
86LPC-TBNCL3/40 Triaxial Patch Cable
$325.00 (€264.23)
Designed for microprobing industry. Shown with black cable . Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00 (€508.13)
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00 (€203.25)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74A series shown
74JA-BC Coax Probe Holder with custom bends
$375.00 (€304.88)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
74JA-FPC-6000 DC Probe Holder
74JA DC Probe Holder
$125.00 (€101.63)
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+ −
WH5000 Series Heated Wirebonding Workholders
WH5000 Series Heated Wirebonding Workholders
$3,195.00 (€2,597.56)
Mechanical device clamping provides the optimum vibration-free positive hold down required to eliminate fixture related wire bonding problems. Mechanical...
+ −
WH5000C Series Heated Wirebonding Workholders
WH5000C Series Heated Wirebonding Workholders
$3,195.00 (€2,597.56)
Heated Workholder identical to the WH-5000; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features Variable "Z" axis...
+ −
WH5050C Series Heated Wirebonding Workholders
WH5050C Series Heated Wirebonding Workholders
$3,425.00 (€2,784.55)
Heated Wirebonding Workholder identical to the WH-5050; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features...
+ −
WH5050 Series Heated Wirebonding Workholders
$3,595.00 (€2,922.76)
Vacuum device hold-down Heated Wirebonding Workholder provides positive device clamping for flat based, or easily chipped substrates where mechanical...
+ −
72J-BT In-Line probe mounting
74J-BT Triaxial Probe Holder
$475.00 (€386.18)
The triaxial probe holder with custom bends and optional piviot mount, shown mounting into an Alessi positioner.   The in-line / low...
+ −
WEC-LC24 Low Leakage/High Voltage Interface and Probe Cards
WEC-LC24 Low Leakage/High Voltage Interface and Probe Cards
Contact us for a price
The WEC-LC24 is a 24-channel low-leakage interface designed for low current applications requiring minimal leakage. The interface is also designed to...
74J-BT-KSA2/UMK Triaxial Probe Holder
74J-BT-KSA2/UMK Triaxial Probe Holder
$575.00 (€467.48)
The low profile, triaxial probe holder with bends to provide the OEM form-factor of the Suss Microtech probe arm.   The in-line / low...
+ −
Probe Specification chart
$0.00 (€0.00)
Please refer to this sheet for an explaniation of how to read American Probe & Technologies probe model numbers. Probe Speficification Chart
+ −
AW7000C Series Ambient Wirebonding Workholders
$1,995.00 (€1,621.95)
+ −
AW7050C Series Ambient Wirebonding Workholders
$2,195.00 (€1,784.55)
+ −
WEC-04085 Direct Dock Interface
WEC-04085 Direct Dock Interface
Contact us for a price
The WEC-04085 Direct Dock Interface is a spring-probe based interface that eliminates the primary source of parasitics on an HP 4062 Test System ....
Select options
AW7050 Series Ambient Wirebonding Workholders
$1,395.00 (€1,134.15)
Features Ambient flat pack Wirebonding Workholder for Mech-El Bonders.
+ −
PWC-110 Low Contact Resistance Wedge Probe
PCW-110
$2,275.00 (€1,849.59)
This particular wedge probe was designed for solar cell characterization.  The target resistance was 20 mill ohms, and to include one Kelvin sense...
+ −
WH4640 Heater Controller
WH4640 Heater Controller
$2,995.00 (€2,434.96)
Fully compatible with all workholder designs.
+ −
74J-STSM/MD2
74J-ST Triaxial Probe Holder
$450.00 (€365.85)
The low profile, straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The in-line /...
+ −
PH1 Series Wirebonding Pull Hooks
PH1 Series Wirebonding Pull Hooks
$14.50 (€11.79)
Wirebonding Pull Hooks for small gauge Tungsten wire (12 mil)   Please refer to SPECIFICATIONS Tab for dimentional drawings
+ −

Minimum quantity for "PH1 Series Wirebonding Pull Hooks" is 10.

74B-HV500
74B-HV500
$395.00 (€321.14)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
+ −

Minimum quantity for "74B-HV500" is 1.

Shown with optional Dynomometer
CWPT1 Wirepull Tester
$2,495.00 (€2,028.46)
+ −
WPT2000 Wirepull Tester
WPT2000 Wirepull Tester
$1,995.00 (€1,621.95)
+ −
740-EPC-1000 Series Coax probe with embedded PC card
740-EPC Series
$2,695.00 (€2,191.06)
The Soon to be released, 740-EPC Series of coaxial probe holder that has an embedded PC card to allow active and passive components to be integrated within...
+ −
79-1894 BNC Jack to Single Banana Plug (No ground support)
$32.50 (€26.42)
FEATURES: Adapts banana jack test instruments for BNC Cable Assemblies. Banana plug spring is nickel-plated Beryllium Copper and BNC spring is...
+ −
79-1269 BNC (F) To Double Stacking Banana Plug (with ground support)
$31.25 (€25.41)

BNC (Female) To Double Stacking Banana Plugs (with BNC Ground Support)

+ −
 Prev
1 2
Next