$ Applied for purchase:
$ € £
$ Applied for purchase:
($)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2 3 4 5 6 7
Next 
Sort by Alphabetical: Z to A
15 Per Page
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74B-1 DC Probe Holder
74B-1 DC Probe Holder
$95.00
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...
Select options
74A-6000
74A DC Probe Holder
$75.00
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA
Select options
740-EPC-1000 Series Coax probe with embedded PC card
740-EPC Series
$2,695.00
The Soon to be released, 740-EPC Series of coaxial probe holder that has an embedded PC card to allow active and passive components to be integrated within...
+ −
73CT Coax Probe (replaceable tip)
73CT-APTA Replaceable Coaxial Probe
$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.

Select options
73CT-APTA Coaxial Probe Resharpen
$29.50
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.

Select options
73APT-100K-YYY/XXXrZZZ Kelvin Probe
73APT-100K-SR Series Resistor Kelvin Probe
$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...
Select options
73APT-100K Kelvin Probe
73APT-100K Kelvin Probe
$350.00
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...
Select options
73APT Series Coax Probe
73APT Series Coax Probe
$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...
Select options
Coax Probe with R&K
73-1002-RK Probe
$165.00
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.

Select options
72X Fine application probe
72X Tungsten Wire (3 mil) Probe
$10.50
The 72X Series probes are constructed from a 3mil (.003") tungsten wire butt welded to a 20 mil nickel-S shank diameter. Note: All prices are...

Minimum quantity for "72X Tungsten Wire (3 mil) Probe" is 20.

Select options
72T Solid Tungsten Probe
72T Series Tungsten Probes
$9.50

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.

Select options
Shown mounted into 74CJA Holder (optional)
72SPP Series Spring Pogo Probe
$3.25
Pogo Pin with 12MM length and 0.193" OD, Rhodium plated steel plunger probe contact. 1.5-1.7 oz spring force
+ −

Minimum quantity for "72SPP Series Spring Pogo Probe" is 20.

72S Series Probe
72S Tungsten Wire (5 mil) Probe
$10.50
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.

Select options
72G Gold Plated Tungsten Probe
72G Gold Plated Tungsten Probe
$18.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.

Select options
 Prev
1 2 3 4 5 6 7
Next