Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

$8.00

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.


$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.


$1,425.00
LP600-MB Micropositioner with magnetic base (shown with optional tilt and swivel mounting arm and 74CJ low current probeholder). Engineered for the...
+

$250.00
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.


$23.50
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.


$130.00
Triax ial BNC (male) to coax ial BNC (female) floating ground. A “must have” low current adapter for using coax ial probes and holder...
+

$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...

$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...

$9.25
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.


$17.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.


$8.25
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.


$18.00

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.


$350.00
Connect your new 74CJ probes and holders to your instrumentation without loosing performance. The 86LPC-SSMC interface cable also acts as an adapter to...
+

$795.00
LP440L shown with optional 78LP5-MMK1/2 Mounting Adapter and 74CJ probeholder. Engineered for the general purpose probing requirements, the APT model LP-440...

$350.00
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...