$ Applied for purchase:
$ € £
$ Applied for purchase:
(£)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2
Next 
Sort by Popularity: Low to High
64 Per Page
79-1269 BNC (F) To Double Stacking Banana Plug (with ground support)
$31.25 (£22.81)

BNC (Female) To Double Stacking Banana Plugs (with BNC Ground Support)

+ −
79-1894 BNC Jack to Single Banana Plug (No ground support)
$32.50 (£23.72)
FEATURES: Adapts banana jack test instruments for BNC Cable Assemblies. Banana plug spring is nickel-plated Beryllium Copper and BNC spring is...
+ −
740-EPC-1000 Series Coax probe with embedded PC card
740-EPC Series
$2,695.00 (£1,967.15)
The Soon to be released, 740-EPC Series of coaxial probe holder that has an embedded PC card to allow active and passive components to be integrated within...
+ −
WPT2000 Wirepull Tester
WPT2000 Wirepull Tester
$1,995.00 (£1,456.20)
+ −
Shown with optional Dynomometer
CWPT1 Wirepull Tester
$2,495.00 (£1,821.17)
+ −
74B-HV500
74B-HV500
$395.00 (£288.32)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
+ −

Minimum quantity for "74B-HV500" is 1.

PH1 Series Wirebonding Pull Hooks
PH1 Series Wirebonding Pull Hooks
$14.50 (£10.58)
Wirebonding Pull Hooks for small gauge Tungsten wire (12 mil)   Please refer to SPECIFICATIONS Tab for dimentional drawings
+ −

Minimum quantity for "PH1 Series Wirebonding Pull Hooks" is 10.

74J-STSM/MD2
74J-ST Triaxial Probe Holder
$450.00 (£328.47)
The low profile, straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The in-line /...
+ −
WEC-04085 Direct Dock Interface
WEC-04085 Direct Dock Interface
Contact us for a price
The WEC-04085 Direct Dock Interface is a spring-probe based interface that eliminates the primary source of parasitics on an HP 4062 Test System ....
Select options
PWC-110 Low Contact Resistance Wedge Probe
PCW-110
$2,275.00 (£1,660.58)
This particular wedge probe was designed for solar cell characterization.  The target resistance was 20 mill ohms, and to include one Kelvin sense...
+ −
AW7050 Series Ambient Wirebonding Workholders
$1,395.00 (£1,018.25)
Features Ambient flat pack Wirebonding Workholder for Mech-El Bonders.
+ −
WH4640 Heater Controller
WH4640 Heater Controller
$2,995.00 (£2,186.13)
Fully compatible with all workholder designs.
+ −
AW7050C Series Ambient Wirebonding Workholders
$2,195.00 (£1,602.19)
+ −
AW7000C Series Ambient Wirebonding Workholders
$1,995.00 (£1,456.20)
+ −
WEC-LC24 Low Leakage/High Voltage Interface and Probe Cards
WEC-LC24 Low Leakage/High Voltage Interface and Probe Cards
Contact us for a price
The WEC-LC24 is a 24-channel low-leakage interface designed for low current applications requiring minimal leakage. The interface is also designed to...
74J-BT-KSA2/UMK Triaxial Probe Holder
74J-BT-KSA2/UMK Triaxial Probe Holder
$575.00 (£419.71)
The low profile, triaxial probe holder with bends to provide the OEM form-factor of the Suss Microtech probe arm.   The in-line / low...
+ −
72J-BT In-Line probe mounting
74J-BT Triaxial Probe Holder
$475.00 (£346.72)
The triaxial probe holder with custom bends and optional piviot mount, shown mounting into an Alessi positioner.   The in-line / low...
+ −
Probe Specification chart
$0.00 (£0.00)
Please refer to this sheet for an explaniation of how to read American Probe & Technologies probe model numbers. Probe Speficification Chart
+ −
WH5050C Series Heated Wirebonding Workholders
WH5050C Series Heated Wirebonding Workholders
$3,425.00 (£2,500.00)
Heated Wirebonding Workholder identical to the WH-5050; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features...
+ −
WH5050 Series Heated Wirebonding Workholders
$3,595.00 (£2,624.09)
Vacuum device hold-down Heated Wirebonding Workholder provides positive device clamping for flat based, or easily chipped substrates where mechanical...
+ −
74JA-FPC-6000 DC Probe Holder
74JA DC Probe Holder
$125.00 (£91.24)
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+ −
WH5000C Series Heated Wirebonding Workholders
WH5000C Series Heated Wirebonding Workholders
$3,195.00 (£2,332.12)
Heated Workholder identical to the WH-5000; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features Variable "Z" axis...
+ −
86LPC-TBNCL3/40 Triaxial Patch Cable
86LPC-TBNCL3/40 Triaxial Patch Cable
$325.00 (£237.23)
Designed for microprobing industry. Shown with black cable . Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00 (£182.48)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74A series shown
74JA-BC Coax Probe Holder with custom bends
$375.00 (£273.72)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00 (£456.20)
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
WH5000 Series Heated Wirebonding Workholders
WH5000 Series Heated Wirebonding Workholders
$3,195.00 (£2,332.12)
Mechanical device clamping provides the optimum vibration-free positive hold down required to eliminate fixture related wire bonding problems. Mechanical...
+ −
74J-SC Probe Holder
74J-SC - Straight Coax Probe Holder
$325.00 (£237.23)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.

86TPC-TBNCL3/40 Triaxial Patch Cable
86TPC-TBNCL3/40 Triaxial Patch Cable
$265.00 (£193.43)
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00 (£346.72)
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
74B-1K DC Probe Holder
74B-1K DC Probe Holder
$355.00 (£259.12)
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74J-SAI DC Probe Holder
74J-SAI DC Probe Holder
$75.00 (£54.74)
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+ −
Shown mounted into 74CJA Holder (optional)
72SPP Series Spring Pogo Probe
$3.25 (£2.37)
Pogo Pin with 12MM length and 0.193" OD, Rhodium plated steel plunger probe contact. 1.5-1.7 oz spring force
+ −

Minimum quantity for "72SPP Series Spring Pogo Probe" is 20.

71G Gold Plated Probe
71G Gold Plated Tungsten Probe
$17.00 (£12.41)
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.

Select options
AW-7000 Ambient Wirebonding Workholder
AW7000 Series Ambient Wirebonding Workholders
$1,695.00 (£1,237.23)



+ −
74B-1 DC Probe Holder
74B-1 DC Probe Holder
$95.00 (£69.34)
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...
Select options
74A-6000
74A DC Probe Holder
$75.00 (£54.74)
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA
Select options
Turn-Key Probe Card Test Solution
Turn-Key Probe Card Test Solution
Contact us for a price
Features Leakage and capacitance characterization of blank or populated probe cards. Designed for Agilent 4070 Series or Keithley S600 cards....
76LPC-SSMC/40 shown
76LPC-SSMC-B Coaxial Patch Cable
$165.00 (£120.44)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC...
Select options
71T Tungsten Wire Probe
71T Tungsten Wire Probe
$8.45 (£6.17)
71T Probes are made from solid tungsten wire and can be nickel plated for solderability. Features Common series for probe card probes. True...

Minimum quantity for "71T Tungsten Wire Probe" is 20.

Select options
72C Catswhisker Probe - Obsolete
72C Catswhisker Probe
Contact us for a price
DISCONTINUED - USE 72A  or 72S SERIES The 72C Series probes are constructed from a 5 mil (.005") tungsten wire with a C-bend butt welded...
Select options
UC1000 Ultrasonic Cutter
UC1000 Ultrasonic Cutter
$2,695.00 (£1,967.15)
Features Ultrasonic Cutter System includes ultrasonic generator with adjustable power output, reference meter, test button, and foot switch....
+ −
Free shipping
Credit Card Portal
$100.00 (£72.99)
If you would like to securely provide American Probe & Technologies with your credit card information, please order this product. The credit card...

Minimum quantity for "Credit Card Portal" is 1.

Custom for use with 74CJ probe holder
70 Series Custom Probes
Contact us for a price
For custom shank sizes. The series is for all probes that are non-standard in shank diameter (other than 10 or 20 mil). Many shank sizes ranging from 5...
Select options
Kelvin IsoChuck
Kelvin IsoChuck
Contact us for a price
ISO-CHUCK for Electroglas 2001 with dual BNC connectors. One of the many materials that APT has chosen for the IsoChuck design is Ultem. This...
UC2500 Ultrasonic Cutter
UC2500 Ultrasonic Cutter
$3,800.00 (£2,773.72)
See also 72T, 72TC
+ −
79SSMC-SMA-A1 Coaxial Adapter
79SSMC-SMA-A1 Coaxial Adapter
$175.00 (£127.74)
Coaxial SSMC (female) to SMA (female). Features Allows connection of SSMC devices to SMA instrumentation. Connectors are female SSMC to female...
+ −
79SM2090 Coaxial Adapter
79SM2090 Coaxial Adapter
$159.00 (£116.06)
Features Adapter for converting coaxial SSMC (male) to SMA (female) adapter.
+ −
74JA-SC-6000 shown
74JA-SC Coaxial Probe Holder
$355.00 (£259.12)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −
76LWA Ground Assy
76GWA Ground Wire Assembly
$35.00 (£25.55)
Features:  The American Probe & Technologies Ground Wire Assembly is designed to provide an easly installed method of connecting a...
Select options
76CPC-188-SSMA/60 Coaxial Patch Cable
76CPC-188-SSMA/60 Coaxial Patch Cable
$110.00 (£80.29)
Features Coaxial patch cable with SSMA (male) to BNC (male) connectors. Cable type is RG188. Cable length: 60" (1.5 meter). *Cost varies...
+ −
70T-F4/125B-034x1.2 Probe
70T-034 Tungsten Probe
$18.50 (£13.50)
Can be used with 74CJ and DCP-15X Series probe holders to provide a ground return path when used with another coaxial probe.  Does not require the...

Minimum quantity for "70T-034 Tungsten Probe" is 5.

Select options
79BN73 Triaxial Tee (3 lug) Adapter
79BN73 Triaxial Tee (3 lug) Adapter
$150.00 (£109.49)
Triaxial BNC (male) to 2 ea triaxial BNC (female). Features Triaxial Tee Adapter 3 lug. Includes one male to two female connections.
+ −
76CPC-BNC/24 BNC patch cable
76CPC-BNC/40 Coaxial Patch Cable
$85.00 (£62.04)
+ −
74J-BC-6000
74J-BC Coaxial Probe Holder
$375.00 (£273.72)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
+ −
76LPC-BNC/40 Coaxial Patch Cable
76LPC-BNC/40 Coaxial Patch Cable
$175.00 (£127.74)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coaxial cable, and terminated with RT angle SSMC plug and BNC...
+ −
79BJ77-E1-PL20
79BJ77-E1-PL20 Triaxial to Coaxial Adapter
$155.00 (£113.14)
Triaxial 3 lug BNC (female) connector to coaxial 2 lug BNC (male) adapter. The connection configuration of this adapter is "E1": Signal to signal / triax...
+ −
72X Fine application probe
72X Tungsten Wire (3 mil) Probe
$10.50 (£7.66)
The 72X Series probes are constructed from a 3mil (.003") tungsten wire butt welded to a 20 mil nickel-S shank diameter. Note: All prices are...

Minimum quantity for "72X Tungsten Wire (3 mil) Probe" is 20.

Select options
79BJ20-E2-PL75 Adapter
79BJ20-E2-PL75 Triaxial to Coaxial Adapter
$175.00 (£127.74)
Triaxial BNC (male) to coaxial BNC (female) floating guard. Features Triaxial (male) to coax ial (female) adapter. Connections: triax ial...
+ −
79BJ20-E1-BJ79 Triaxial to Coaxial Adapter
79BJ20-E1-BJ79 Triaxial to Coaxial Adapter
$150.00 (£109.49)
Triaxial 3 lug BNC (female) to coaxial BNC (female) bulkhead adapter.  This series of adapter can be mounted into a chassis panel or...
Select options
Coax Probe with R&K
73-1002-RK Probe
$165.00 (£120.44)
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.

Select options
76CPC-SSMC/40 Coaxial Patch Cable
76CPC-SSMC/40 Coaxial Patch Cable
$110.00 (£80.29)
Features Coax ial  patch cable with R/A SSMC (female) to BNC (male) connectors. Cable length: 40" (1 meter) of RG174 coaxial. *Cost varies...
Select options
78CJ-LP51-I Mounting Adapter
78CJ-LP51-I Mounting Adapter
$195.00 (£142.34)
+ −
78RFUM-1 Mounting Adapter
78RFUM-1 Mounting Adapter
$165.00 (£120.44)
Universal Mount for micropositioners designed for RF probes. Features This mount is designed to maintain the form-factor of the RF probe,...
+ −
 Prev
1 2
Next