Analytical Probes

$8.00

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.


$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.


$250.00
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.


$23.50
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.


$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...

$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...

$9.25
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.


$17.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.


$8.25
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.


$18.00

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.


$350.00
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...

$350.00
The Flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of...


$375.00
Low Profile form factor of 74CJ and DCP100 Series with ability to use any 20 mil disposable probe.  Excellent for applications that require the following:...

Minimum quantity for "74CJA-APT-KS Coaxial Probe Holder" is 1.


$29.50
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.


$13.70
The 72F Series probes are constructed from a 1 mil (.001") tungsten wire crimped into a 20 mil nickel plated copper shank. Features Excellent...

Minimum quantity for "72F Tungsten Wire (1 mil) Probe" is 20.