$ Applied for purchase:
$ € £
$ Applied for purchase:
($)
Support Topics

Analytical Probes

 Prev
1 2
Next 
Sort by Alphabetical: Z to A
32 Per Page
PWC-110 Low Contact Resistance Wedge Probe
PCW-110
$2,275.00
This particular wedge probe was designed for solar cell characterization.  The target resistance was 20 mill ohms, and to include one Kelvin sense...
+ −
74JA-STSM Coaxial Probe Holder
74JA-ST Triaxial Probe Holder
$450.00
The straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The probe mounting pin jack...
+ −
74JA-SC-6000 shown
74JA-SC Coaxial Probe Holder
$355.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
74A series shown
74JA-BC Coax Probe Holder with custom bends
$375.00
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
74JA-FPC-6000 DC Probe Holder
74JA DC Probe Holder
$125.00
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+ −
74J-STSM/MD2
74J-ST Triaxial Probe Holder
$450.00
The low profile, straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The in-line /...
+ −
74J-SC Probe Holder
74J-SC - Straight Coax Probe Holder
$325.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.

74J-SAI DC Probe Holder
74J-SAI DC Probe Holder
$75.00
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+ −
74J-BT-KSA2/UMK Triaxial Probe Holder
74J-BT-KSA2/UMK Triaxial Probe Holder
$575.00
The low profile, triaxial probe holder with bends to provide the OEM form-factor of the Suss Microtech probe arm.   The in-line / low...
+ −
72J-BT In-Line probe mounting
74J-BT Triaxial Probe Holder
$475.00
The triaxial probe holder with custom bends and optional piviot mount, shown mounting into an Alessi positioner.   The in-line / low...
+ −
74J-BC-6000
74J-BC Coaxial Probe Holder
$375.00
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
+ −
74CJA-APT-KS/90 shown
74CJA-APT-KS Coaxial Probe Holder
$375.00
Low Profile form factor of 74CJ and DCP100 Series with ability to use any 20 mil disposable probe.  Excellent for applications that require the following:...

Minimum quantity for "74CJA-APT-KS Coaxial Probe Holder" is 1.

Select options
74CJ
74CJ-APT-KS-SR Low Noise Coaxial Holder with Series Resistor
$350.00
The Flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of...

Select options
74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
74CJ Series Coaxial Probe Holder
74CJ-APT-KS Series Coaxial Probe Holder
$250.00
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.

Select options
74B-HV500
74B-HV500
$395.00
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
+ −

Minimum quantity for "74B-HV500" is 1.

74B-1K DC Probe Holder
74B-1K DC Probe Holder
$355.00
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74B-1 DC Probe Holder
74B-1 DC Probe Holder
$95.00
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...
Select options
74A-6000
74A DC Probe Holder
$75.00
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA
Select options
740-EPC-1000 Series Coax probe with embedded PC card
740-EPC Series
$2,695.00
The Soon to be released, 740-EPC Series of coaxial probe holder that has an embedded PC card to allow active and passive components to be integrated within...
+ −
73CT Coax Probe (replaceable tip)
73CT-APTA Replaceable Coaxial Probe
$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.

Select options
73CT-APTA Coaxial Probe Resharpen
$29.50
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.

Select options
73APT-100K-YYY/XXXrZZZ Kelvin Probe
73APT-100K-SR Series Resistor Kelvin Probe
$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...
Select options
73APT-100K Kelvin Probe
73APT-100K Kelvin Probe
$350.00
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...
Select options
73APT Series Coax Probe
73APT Series Coax Probe
$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...
Select options
Coax Probe with R&K
73-1002-RK Probe
$165.00
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.

Select options
72X Fine application probe
72X Tungsten Wire (3 mil) Probe
$10.50
The 72X Series probes are constructed from a 3mil (.003") tungsten wire butt welded to a 20 mil nickel-S shank diameter. Note: All prices are...

Minimum quantity for "72X Tungsten Wire (3 mil) Probe" is 20.

Select options
72T Solid Tungsten Probe
72T Series Tungsten Probes
$9.50

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.

Select options
Shown mounted into 74CJA Holder (optional)
72SPP Series Spring Pogo Probe
$3.25
Pogo Pin with 12MM length and 0.193" OD, Rhodium plated steel plunger probe contact. 1.5-1.7 oz spring force
+ −

Minimum quantity for "72SPP Series Spring Pogo Probe" is 20.

72S Series Probe
72S Tungsten Wire (5 mil) Probe
$10.50
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.

Select options
 Prev
1 2
Next