$ Applied for purchase:
$ € £
$ Applied for purchase:
(€)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2
Next 
Sort by Price: High to Low
64 Per Page
UC2500 Ultrasonic Cutter
UC2500 Ultrasonic Cutter
$3,800.00 (€3,089.43)
See also 72T, 72TC
+ −
WH5050 Series Heated Wirebonding Workholders
$3,595.00 (€2,922.76)
Vacuum device hold-down Heated Wirebonding Workholder provides positive device clamping for flat based, or easily chipped substrates where mechanical...
+ −
WH5050C Series Heated Wirebonding Workholders
WH5050C Series Heated Wirebonding Workholders
$3,425.00 (€2,784.55)
Heated Wirebonding Workholder identical to the WH-5050; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features...
+ −
WH5000 Series Heated Wirebonding Workholders
WH5000 Series Heated Wirebonding Workholders
$3,195.00 (€2,597.56)
Mechanical device clamping provides the optimum vibration-free positive hold down required to eliminate fixture related wire bonding problems. Mechanical...
+ −
WH5000C Series Heated Wirebonding Workholders
WH5000C Series Heated Wirebonding Workholders
$3,195.00 (€2,597.56)
Heated Workholder identical to the WH-5000; however, the chuck diameter is a custom size ranging from 2.00 - 6.00". Features Variable "Z" axis...
+ −
WH4640 Heater Controller
WH4640 Heater Controller
$2,995.00 (€2,434.96)
Fully compatible with all workholder designs.
+ −
UC1000 Ultrasonic Cutter
UC1000 Ultrasonic Cutter
$2,695.00 (€2,191.06)
Features Ultrasonic Cutter System includes ultrasonic generator with adjustable power output, reference meter, test button, and foot switch....
+ −
740-EPC-1000 Series Coax probe with embedded PC card
740-EPC Series
$2,695.00 (€2,191.06)
The Soon to be released, 740-EPC Series of coaxial probe holder that has an embedded PC card to allow active and passive components to be integrated within...
+ −
Shown with optional Dynomometer
CWPT1 Wirepull Tester
$2,495.00 (€2,028.46)
+ −
PWC-110 Low Contact Resistance Wedge Probe
PCW-110
$2,275.00 (€1,849.59)
This particular wedge probe was designed for solar cell characterization.  The target resistance was 20 mill ohms, and to include one Kelvin sense...
+ −
AW7050C Series Ambient Wirebonding Workholders
$2,195.00 (€1,784.55)
+ −
AW7000C Series Ambient Wirebonding Workholders
$1,995.00 (€1,621.95)
+ −
WPT2000 Wirepull Tester
WPT2000 Wirepull Tester
$1,995.00 (€1,621.95)
+ −
AW-7000 Ambient Wirebonding Workholder
AW7000 Series Ambient Wirebonding Workholders
$1,695.00 (€1,378.05)



+ −
LP600 Micropositioner
LP600 Micropositioner
$1,425.00 (€1,158.54)
LP600-MB Micropositioner with magnetic base (shown with optional tilt and swivel mounting arm and 74CJ low current probeholder). Engineered for the...
+ −
LP580 Micropositioner
LP580 Micropositioner
$1,400.00 (€1,138.21)
LP580-MB Micropositioner with magnetic base (shown with optional 78CJ-LP51-I Mounting Adapter and 74CJ low current probeholder). Engineered for the...
+ −
AW7050 Series Ambient Wirebonding Workholders
$1,395.00 (€1,134.15)
Features Ambient flat pack Wirebonding Workholder for Mech-El Bonders.
+ −
LP540 Micropositioner
LP540 Micropositioner
$1,375.00 (€1,117.89)
LP540-MB Micropositioner with magnetic base (shown with optional 78LP5-MMK1/2 Mounting Adapter). Engineered for the higher end general purpose...
+ −
LP440 Micropositioner
LP440 Micropositioner
$895.00 (€727.64)
LP440L shown with optional 78LP5-MMK1/2 Mounting Adapter and 74CJ probeholder. Engineered for the general purpose probing requirements, the APT model LP-440...
Select options
74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00 (€508.13)
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
74J-BT-KSA2/UMK Triaxial Probe Holder
74J-BT-KSA2/UMK Triaxial Probe Holder
$575.00 (€467.48)
The low profile, triaxial probe holder with bends to provide the OEM form-factor of the Suss Microtech probe arm.   The in-line / low...
+ −
72J-BT In-Line probe mounting
74J-BT Triaxial Probe Holder
$475.00 (€386.18)
The triaxial probe holder with custom bends and optional piviot mount, shown mounting into an Alessi positioner.   The in-line / low...
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00 (€386.18)
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
73APT-100K-YYY/XXXrZZZ Kelvin Probe
73APT-100K-SR Series Resistor Kelvin Probe
$450.00 (€365.85)
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...
Select options
74JA-STSM Coaxial Probe Holder
74JA-ST Triaxial Probe Holder
$450.00 (€365.85)
The straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The probe mounting pin jack...
+ −
74J-STSM/MD2
74J-ST Triaxial Probe Holder
$450.00 (€365.85)
The low profile, straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The in-line /...
+ −
74B-HV500
74B-HV500
$395.00 (€321.14)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
+ −

Minimum quantity for "74B-HV500" is 1.

74J-BC-6000
74J-BC Coaxial Probe Holder
$375.00 (€304.88)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
+ −
74CJA-APT-KS/90 shown
74CJA-APT-KS Coaxial Probe Holder
$375.00 (€304.88)
Low Profile form factor of 74CJ and DCP100 Series with ability to use any 20 mil disposable probe.  Excellent for applications that require the following:...

Minimum quantity for "74CJA-APT-KS Coaxial Probe Holder" is 1.

Select options
74A series shown
74JA-BC Coax Probe Holder with custom bends
$375.00 (€304.88)
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
74B-1K DC Probe Holder
74B-1K DC Probe Holder
$355.00 (€288.62)
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74JA-SC-6000 shown
74JA-SC Coaxial Probe Holder
$355.00 (€288.62)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −
78LP5-CTSM Mounting Adapter
78LP5-CTSM Mounting Adapter
$350.00 (€284.55)
Course Tilt and Swivel Probeholder Mounting Assembly. Features Designed for use on the LP5XX - LP600 Series of micropositioners. Mounting...
+ −
86LPC-SSMC/40-E1 Triaxial Patch Cable
86LPC-SSMC/40-E1 Triaxial Patch Cable
$350.00 (€284.55)
Connect your new 74CJ probes and holders to your instrumentation without loosing performance. The 86LPC-SSMC interface cable also acts as an adapter to...
+ −
74CJ
74CJ-APT-KS-SR Low Noise Coaxial Holder with Series Resistor
$350.00 (€284.55)
The Flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of...

Select options
73APT-100K Kelvin Probe
73APT-100K Kelvin Probe
$350.00 (€284.55)
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...
Select options
86LPC-TBNCL3/40 Triaxial Patch Cable
86LPC-TBNCL3/40 Triaxial Patch Cable
$325.00 (€264.23)
Designed for microprobing industry. Shown with black cable . Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74J-SC Probe Holder
74J-SC - Straight Coax Probe Holder
$325.00 (€264.23)
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.

86TPC-TBNCL3/40 Triaxial Patch Cable
86TPC-TBNCL3/40 Triaxial Patch Cable
$265.00 (€215.45)
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
74B-1HV DC Probe Holder
74B-1HV DC Probe Holder
$250.00 (€203.25)
Features Tested for use to 5KV. *High voltage option *Does not include instrument connector.
Select options
74CJ Series Coaxial Probe Holder
74CJ-APT-KS Series Coaxial Probe Holder
$250.00 (€203.25)
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.

Select options
73APT Series Coax Probe
73APT Series Coax Probe
$225.00 (€182.93)
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...
Select options
78CJ-SMT1-I Mounting Adapter
78CJ-SMT1-I Mounting Adapter
$225.00 (€182.93)
Features Allows mounting of 74CJ series probe holder on Suss Microtec positioners. Isolated design provides quasi-triaxial connection for low current...
+ −
79SM2085 Coaxial Adapter
79SM2085 Coaxial Adapter
$205.00 (€166.67)
Features Converts coaxial SSMC (female) connection to SMA (male).
+ −
78CJ-LP51-I Mounting Adapter
78CJ-LP51-I Mounting Adapter
$195.00 (€158.54)
+ −
76LPC-SSMC/40 Coaxial Patch Cable
76LPC-SSMC/40 Coaxial Patch Cable
$185.00 (€150.41)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC plug and BNC...
Select options
76LPC-BNC/40 Coaxial Patch Cable
76LPC-BNC/40 Coaxial Patch Cable
$175.00 (€142.28)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coaxial cable, and terminated with RT angle SSMC plug and BNC...
+ −
79SSMC-SMA-A1 Coaxial Adapter
79SSMC-SMA-A1 Coaxial Adapter
$175.00 (€142.28)
Coaxial SSMC (female) to SMA (female). Features Allows connection of SSMC devices to SMA instrumentation. Connectors are female SSMC to female...
+ −
79BJ77-E1-PL20
79BJ77-E1-PL20 Triaxial to Coaxial Adapter
$175.00 (€142.28)
Triaxial 3 lug BNC (female) connector to coaxial 2 lug BNC (male) adapter. The connection configuration of this adapter is "E1": Signal to signal / triax...
+ −
Coax Probe with R&K
73-1002-RK Probe
$165.00 (€134.15)
Features Easily converts to R&K probe head. Lower current resolution than OEM coax probe. Specifications Easy retro-fit to OEM...

Minimum quantity for "73-1002-RK Probe" is 1.

Select options
78LP5-MMK1/2 Mounting Adapter
78LP5-MMK1/2 Mounting Adapter
$165.00 (€134.15)
+ −
78RFUM-1 Mounting Adapter
78RFUM-1 Mounting Adapter
$165.00 (€134.15)
Universal Mount for micropositioners designed for RF probes. Features This mount is designed to maintain the form-factor of the RF probe,...
+ −
79BJ20-E2-PL75 Adapter
79BJ20-E2-PL75 Triaxial to Coaxial Adapter
$165.00 (€134.15)
Triaxial BNC (male) to coaxial BNC (female) floating guard. Features Triaxial (male) to coax ial (female) adapter. Connections: triax ial...
+ −
76LPC-SSMC/40 shown
76LPC-SSMC-B Coaxial Patch Cable
$165.00 (€134.15)
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC...
Select options
79SM2090 Coaxial Adapter
79SM2090 Coaxial Adapter
$159.00 (€129.27)
Features Adapter for converting coaxial SSMC (male) to SMA (female) adapter.
+ −
79BJ20-E1-BJ79 Triaxial to Coaxial Adapter
79BJ20-E1-BJ79 Triaxial to Coaxial Adapter
$150.00 (€121.95)
Triaxial 3 lug BNC (female) to coaxial BNC (female) bulkhead adapter.  This series of adapter can be mounted into a chassis panel or...
Select options
79BN73 Triaxial Tee (3 lug) Adapter
79BN73 Triaxial Tee (3 lug) Adapter
$150.00 (€121.95)
Triaxial BNC (male) to 2 ea triaxial BNC (female). Features Triaxial Tee Adapter 3 lug. Includes one male to two female connections.
+ −
79BJ20-E1-PL75 Triaxial to Coaxial Adapter
79BJ20-E1-PL75 Triaxial to Coaxial Adapter
$149.00 (€121.14)
Triaxial BNC (male) to coaxial BNC (female) floating ground. A “must have” low current adapter for using coaxial probes and holder with common SMU's. When...
+ −
74JA-FPC-6000 DC Probe Holder
74JA DC Probe Holder
$125.00 (€101.63)
Features Direct replacement for Micromanipulator probe holder.  (Requires Model 2 collet with 0.040" mounting shank) Gold plated BeCu...
+ −
76CPC-188-SSMA/60 Coaxial Patch Cable
76CPC-188-SSMA/60 Coaxial Patch Cable
$110.00 (€89.43)
Features Coaxial patch cable with SSMA (male) to BNC (male) connectors. Cable type is RG188. Cable length: 60" (1.5 meter). *Cost varies...
+ −
76CPC-SSMC/40 Coaxial Patch Cable
76CPC-SSMC/40 Coaxial Patch Cable
$110.00 (€89.43)
Features Coax ial  patch cable with R/A SSMC (female) to BNC (male) connectors. Cable length: 40" (1 meter) of RG174 coaxial. *Cost varies...
Select options
Free shipping
Credit Card Portal
$100.00 (€81.30)
If you would like to securely provide American Probe & Technologies with your credit card information, please order this product. The credit card...

Minimum quantity for "Credit Card Portal" is 1.

79BJ73 Triaxial Adapter
79BJ73 Triaxial Adapter
$98.00 (€79.67)
Triaxial Bulkhead Jack feed through adapter. Features Triaxial Bulkhead Connector (female to female).  
+ −
74B-1 DC Probe Holder
74B-1 DC Probe Holder
$95.00 (€77.24)
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...
Select options
 Prev
1 2
Next