$ Applied for purchase:
$ € £
$ Applied for purchase:
($)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2 3 4
Next 
Sort by Popularity
32 Per Page
72T Solid Tungsten Probe
72T Series Tungsten Probes
$9.50

Technical Details:

  • Made from solid 20 mil (0.020" Tungsten wire)
  • Electrochemically etched taper / radius
  • Most common general purpose probe for IC measurement

Minimum quantity for "72T Series Tungsten Probes" is 20.

Select options
73CT Coax Probe (replaceable tip)
73CT-APTA Replaceable Coaxial Probe
$49.50

Replaceable Coaxial Probe for 74CJ and DCP-100 Series Probe Holders

 

 

Minimum quantity for "73CT-APTA Replaceable Coaxial Probe" is 5.

Select options
LP600 Micropositioner
LP600 Micropositioner
$1,425.00
LP600-MB Micropositioner with magnetic base (shown with optional tilt and swivel mounting arm and 74CJ low current probeholder). Engineered for the...
+ −
74CJ Series Coaxial Probe Holder
74CJ-APT-KS Series Coaxial Probe Holder
$250.00
A flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of test...

Minimum quantity for "74CJ-APT-KS Series Coaxial Probe Holder" is 1.

Select options
72P Paliney 7 (ground probe)
72P Paliney® 7 Probe
$23.50
The 72P Series probes are constructed from solid 20 mil Paliney ® 7 alloy wire with a electro-chemially etched taper. ( *Paliney ® 7 is a...

Minimum quantity for "72P Paliney® 7 Probe" is 50.

Select options
79BJ20-E1-PL75 Triaxial to Coaxial Adapter
79BJ20-E1-PL75 Triaxial to Coaxial Adapter
$189.00
Triaxial BNC (male) to coaxial BNC (female) floating ground. A “must have” low current adapter for using coaxial probes and holder with common SMU's. When...
+ −
73APT-100K-YYY/XXXrZZZ Kelvin Probe
73APT-100K-SR Series Resistor Kelvin Probe
$450.00
True Kelvin Probe Design with series resistor on one contact probe Features True Kelvin connection, each probe is connected to one SSMC connector,...
Select options
73APT Series Coax Probe
73APT Series Coax Probe
$225.00
Features Low Current Design. Frequency range DC to 500 MHz. Can be ordered with ground plane probe (*additional charge). Standard .125"...
Select options
72S Series Probe
72S Tungsten Wire (5 mil) Probe
$9.50
  • Compatible with any probe holder able to hold a 20 mil (0.020") mounting shank
  • Excellent for general In-Circuit Probing application
  • Can be ordered in radii ranging from 0.25 micron (250 nm) to 1 micron
  • Constructed from a 5 mil (0.005") tungsten wire butt welded onto a flexible nickel-S shank

Minimum quantity for "72S Tungsten Wire (5 mil) Probe" is 20.

Select options
72G Gold Plated Tungsten Probe
72G Gold Plated Tungsten Probe
$18.50
The 72G Series probes are constructed from solid 20 mil tungsten wire, gold plated with an electrochemically etched taper. Features Reduced...

Minimum quantity for "72G Gold Plated Tungsten Probe" is 50.

Select options
72A Disposable Probe
72A Tungsten Wire (5 mil) Probe
$9.50
The 72A Series Probes are constructed from a 5 mil (.005") tungsten wire butt welded to a 20 mil (0.02") Nickel-S shank. The shank is easily bended into...

Minimum quantity for "72A Tungsten Wire (5 mil) Probe" is 20.

Select options
72BE Beryllium Copper (ground probe)
72BE Beryllium Copper Probe
$21.00

Solid beryllium copper wire electro-chemially etched to the desired taper and radius

Minimum quantity for "72BE Beryllium Copper Probe" is 50.

Select options
LP440 Micropositioner
LP440 Micropositioner
$895.00
LP440L shown with optional 78LP5-MMK1/2 Mounting Adapter and 74CJ probeholder. Engineered for the general purpose probing requirements, the APT model LP-440...
Select options
86LPC-SSMC/40-E1 Triaxial Patch Cable
86LPC-SSMC/40-E1 Triaxial Patch Cable
$350.00
Connect your new 74CJ probes and holders to your instrumentation without loosing performance. The 86LPC-SSMC interface cable also acts as an adapter to...
+ −
73APT-100K Kelvin Probe
73APT-100K Kelvin Probe
$350.00
True Kelvin Probe Design Features True Kelvin connection, each probe is connected to one SSMC connector, the ground/guard is shared. Requires...
Select options
74CJ
74CJ-APT-KS-SR Low Noise Coaxial Holder with Series Resistor
$350.00
The Flexible Low Current Design with easily replaced coax probes. The probe holder is provided with dual SSMC connectors that allows for variety of...

Select options
Coaxial IsoChuck
Coaxial IsoChuck
Contact us for a price
300 mm IsoChuck designed for Suss Microtec Prober.  Coax design with less than 120 pF of passive capacitance. The newly announced IsoChuck...
74CJA-APT-KS/90 shown
74CJA-APT-KS Coaxial Probe Holder
$375.00
Low Profile form factor of 74CJ and DCP100 Series with ability to use any 20 mil disposable probe.  Excellent for applications that require the following:...

Minimum quantity for "74CJA-APT-KS Coaxial Probe Holder" is 1.

Select options
73CT-APTA Coaxial Probe Resharpen
$29.50
For all of you that have asked the question, Can the 73CT Series replaceable coax probe be resharpened? The answer is YES!  This is what you...

Minimum quantity for "73CT-APTA Coaxial Probe Resharpen" is 1.

Select options
79SM2085 Coaxial Adapter
79SM2085 Coaxial Adapter
$205.00
Features Converts coaxial SSMC (female) connection to SMA (male).
+ −
79BJ73 Triaxial Adapter
79BJ73 Triaxial Adapter
$98.00
Triaxial Bulkhead Jack feed through adapter. Features Triaxial Bulkhead Connector (female to female).  
+ −
HC-6000-RC1 Series
HC6000 Thermal Wafer Chuck
Contact us for a price
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks, designed to provide...
Select options
76LWA Litz ground wire application
76LWA Litz ground wire
$35.00
Litz Ground wire

Minimum quantity for "76LWA Litz ground wire" is 1.

Select options
LP580 Micropositioner
LP580 Micropositioner
$1,400.00
LP580-MB Micropositioner with magnetic base (shown with optional 78CJ-LP51-I Mounting Adapter and 74CJ low current probeholder). Engineered for the...
+ −
Triaxial IsoChuck
Triaxial IsoChuck
Contact us for a price
Ultem 1000 is one of several materials available for the IsoChuck Series of wafer chucks. Contact American Probe & Technologies for details on the...
LP540 Micropositioner
LP540 Micropositioner
$1,375.00
LP540-MB Micropositioner with magnetic base (shown with optional 78LP5-MMK1/2 Mounting Adapter). Engineered for the higher end general purpose...
+ −
78CJ-SMT1-I Mounting Adapter
78CJ-SMT1-I Mounting Adapter
$225.00
Features Allows mounting of 74CJ series probe holder on Suss Microtec positioners. Isolated design provides quasi-triaxial connection for low current...
+ −
74JA-STSM Coaxial Probe Holder
74JA-ST Triaxial Probe Holder
$450.00
The straight triaxial probe holder with piviot mount, shown on American Probe & Technologies LP600 micropositioner.  The probe mounting pin jack...
+ −
72F Fine wire Probe (0.001")
72F Tungsten Wire (1 mil) Probe
$13.75
The 72F Series probes are constructed from a 1 mil (.001") tungsten wire crimped into a 20 mil nickel plated copper shank. Features Excellent...

Minimum quantity for "72F Tungsten Wire (1 mil) Probe" is 20.

Select options
78LP5-MMK1/2 Mounting Adapter
78LP5-MMK1/2 Mounting Adapter
$165.00
+ −
78LP5-CTSM Mounting Adapter
78LP5-CTSM Mounting Adapter
$350.00
Course Tilt and Swivel Probeholder Mounting Assembly. Features Designed for use on the LP5XX - LP600 Series of micropositioners. Mounting...
+ −
HC5000 Hot Chuck
HC5000 Hot Chuck
Contact us for a price
 Prev
1 2 3 4
Next